Package list:1pc sliver Bridge dent puller (not include glue gun and glue sticks)
Please Pay attention:
You need a glue gun and glue sticks to use this PDR Tool , it don’t including
The following are the Instructions about how to use these pdr kits, the package don’t include all the products in the instruction.
How to use this paintless dent repair kits?
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
NOTE: If you don’t know how to use this tool,Please do feel free contact with us ,we will sent a video link to you. Due to Amazon page do not allow to show video,hope you kindly understanding.
- Won’t destroy the equippment of the car,Won’t hurt the original paint
- Easy to operate.Even the girl can easily repair
- DIY at home. Save money and no damage to your car body
- Technical professionals are available to serve you for life
- Our PDR Tool is suitable for the sheet metal processing of automobile, refrigerator, Motorcycle Body，and washing machine，etc